How to Clean a Welding Helmet Lens – Fast and Easy

How to Clean a Welding Helmet Lens

It is undoubtedly true that one would not want to spend a lot of money purchasing a new welding helmet only to find out the helmet has been damaged by dirt.

Although it may seem like a minor matter, maintaining your welding helmet free of stain will prevent unnecessary expenditures. Cleaning your helmet is helpful for many reasons, as well as being a matter of general hygiene.

This ensures that the welding requirement is in proper condition, which assures you that it ensures the proper safety of all your body parts and the choices of welding processes like TIG, MIG, and stick.

A couple of items may be helpful during the process of cleaning welding helmet lenses

The Following Are Things to Consider When Cleaning Welding Helmet Lenses

It is essential to read the manufacturer’s instructions carefully before you commence the washing process. Be careful not to use the same cleaning method on each kind of welding helmet. The lenses may become less clear if they are scratched.

Be sure to remove the batteries from a battery-powered welding helmet before washing it. Provide you have replaced the batteries with new ones after washing the helmet to ensure its excellent performance.

The equipment may lose considerable performance or effectiveness if it is not protected.

Avoid brushing around the battery compartments when cleaning a solar welding helmet. The batteries used in that kind of helmet are more expensive than the batteries of ordinary helmets, so we also do not want to contribute to the expense of wasting them.

The lens of a layered welding helmet should be carefully brushed to ensure that each section is brushed thoroughly. Failure to do so will lead to small dirt particles remaining behind, which may eventually result in problems.

It would help if you used thin microfiber towels when using a microfiber cloth because thick ones may scratch your lenses. Speaking of scratches, extra caution needs to be observed when cleaning coated lenses since any shape or size scratch may damage the coating.

Cleaning Your Welding Helmet Lens May Require the Following Items

How to Clean a Welding Helmet Lens

CLEANING WIPES

The market usually offers a wide range of cleaning wipes. Still, you have to use the correct type of wipes containing the appropriate materials to avoid damaging your helmet’s lenses and fibers.

The Care Touch Cleaning Wipes, each individually wrapped and pre-moistened, are the best option for cleaning wipes as you don’t need to go through the bother of wetting them with water or pulling them one by one.

PLAIN ROOM TEMPERATURE WATER

While talking about How to Clean a Welding Helmet Lens, It may be the most basic welding lens cleaner, but there is nothing else better at removing dirt than water. Just be sure that the water you use is not too cool since it sometimes makes the dirt freeze and more challenging to remove or too hot, which can damage the lens.

HELMET SPRAY

It is essential to keep your welding helmet free from dirt and stains and keep it safe and free from germs and microbes. Using a helmet cleaner spray will not only keep your welding helmet clean, but it is also disinfectant and deodorizing.

BRUSH AND BUFFING WHEEL

Buffing wheels are specially designed to smooth and brighten a metal or wood surface because we do not want scratches on the helmet lens. A brush with smooth bristles may be the ideal tool for the job since we don’t like having scratches on the helmet lens.

Clearance Process

How to Clean a Welding Helmet Lens

When we maintain and take care of our welding helmets, we want to ensure we are doing it correctly. However, sometimes we tend to take it for granted, not realizing we are doing it wrong and causing further deterioration.

STEP 1. WIPE THE SURFACE

Wipe the whole skin of the welding lens with cleaning wipes to prevent dust and debris from accumulating. If cleaning wipes are unavailable, welders can set up an alternative using a soft cloth or a piece of wet tissue.

STEP 2. DETACH THE COVER LENS FROM THE HELMET

While speaking about How to Clean a Welding Helmet Lens, It is a good idea to cover the lens in warm water mixed with household detergent overnight so that any dirt or debris is removed before continuing the cleaning process in the morning. Soak the cover lens in this solution to make removing the hardened dirt on the lens easier.

STEP 3. SCRUB THE SURFACE

You should handle the lens with adequate care because it is fragile, and keep an extra eye on avoiding scratches. Additionally, make sure you don’t hold it on the direct surface as it may break.

You need to brush the grease thoroughly and small sediments with a soft-bristled brush to get everything off. Make sure to scrub the most hidden part thoroughly to get a complete clean. Clean the lenses thoroughly. Rinse with water at room temperature. Let them dry.

STEP 4. USE A BUFFING WHEEL

The soft wheel on a buffing machine will be great for removing stiff dents and scratches on welding helmet lenses. If you want to witness a more excellent outcome, use the buffing wheel on a flat or curved surface.

The lens is attached gently to the buffing wheel. Add a hint of buffing compound to boost the efficiency of the wheel. As the wheel buffs watch for the lens blemishes, a noticeable difference should be seen in the quality of the arc.

STEP 5. DISINFECT YOUR WELDING HELMET

It is preferable to disinfect the whole welding hood with a helmet cleaner spray than to use a lens cleaner, as this ensures that the hood has a clear lens and free from any germs or odor.

It is essential to be familiar with your welding helmet in your cleaning process and know the right kind of cleaning equipment and tools for it, according to its particular materials and components. Understanding these things will enable your welding helmet to last for an extended period.

Whenever you choose the tools, you will use to sanitize, try to use only products with the recommended quality.

The effects of welding include smoke, dirt, and scratches that ruin the view through a welder’s helmet. Please do not ruin the helmet by failing to wipe it down after every use and storing it properly in a bag or compartment.

General Tips

Keeping these tips in mind while cleaning a welding helmet:

  • It might be necessary to clean different helmets differently. So, check the manufacturer’s user manual before cleaning your helmet.
  • Please be aware that some battery-powered helmets have batteries that can be removed while cleaning the helmet.
  • It is recommended that you replace the batteries in your helmet once it has been cleaned.
  • You must be extremely careful and careful around the battery area when you have a solar-powered helmet.
  • Whenever your helmet has a multilayered lens, take it off and clean it individually.

While conversing about How to Clean a Welding Helmet Lens, It doesn’t take much effort to clean a welding helmet lens. It only requires brushing and wiping and possibly rotating or replacing. So, stop being lazy and take a few minutes out of your day to do it! I promise you will not have to leave the house for it.

Leave a Comment